Forum Replies Created
- Replies
I would like to share two more methods to fix this “write protection” issue that I have experienced recently. Please apply the following methods:
1) There might be a problem with the port itself (not in the card) where you are connecting this card. Simply use a simple SD/Micro Card hub and connect your card to that. Make sure to use a different port than what you have used before.
2) Might be the card cannot not be formatted through the computer, you’ll need to insert this card to any of your android devices (Phone/Tabs) and there you can easily re-format the card.
+ 0
Try to change the default app, like this: https://support.microsoft.com/en-us/windows/change-default-programs-in-windows-e5d82cad-17d1-c53b-3505-f10a32e1894d.
Otherwise, it seems like your EXE default file association has been changed to “Media Center” . You’ll need to reset the EXE file association to its default settings (factory settings). I am giving you an default file of EXE file association which will reset your exe file association. Open the given zip file and execute the inside .reg file and click on “Next” or “Yes” to update your EXE file association default app.
+ 0
Follow the steps below and let me know the results.
1) Install / Update Microsoft C++ Library
2) Install / Update the latest Dot.Net framework.
3) Run that application in administrator mode (Run as administrator)
4) Make sure you are logged in to your Administrative Privileges account.
5) Run the application in compatibility mode.
+ 0
Try this article. This will help you fix the problem: https://www.techsupportall.com/fixed-solved-cd-drive-not-found-not-detect-remove-upper-and-lower-filter/
+ 0
There are several driver files and registry paths are different in Windows 11 than Windows 10. Without reinstalling it won’t be possible to start printing again. Eventually, reinstall the driver on the client’s computer.
+ 0
We have created a dedicated article on this, please check it out: https://www.techsupportall.com/fix-operation-failed-with-error-0x0000011b-windows-cannot-connect-to-the-printer/
And do let me know if it doesn’t work.+ 0
Yes, this is the main cause of NO boot.
Bad clusters are also called bad sectors. They are a small area on a disk which is not readable by the system. A bad cluster can be caused by several different factors including physical damage, file system corruption, and so on.
A bad cluster is usually caused by physical damage to the disk or file system corruption. Bad sectors are often caused by wear-and-tear on the disk platter, or from power surges or brownouts.
How to backup Raid 0
A Raid 0 array is a setup of two or more hard drives in which the data on all drives is simultaneously accessible. This type of setup offers speed and redundancy, but it has one major flaw: If one drive fails, all data on the array is lost. To avoid this, we need to backup the Raid 0 array into an external drive.
There are two ways to do this:
1) Backup the Raid 0 array manually by connecting an external drive to your computer and copying all files from your hard drive to it.
2) Use a third-party software such as Acronis True Image that can automatically back up your hard disk with just one click.
The best way to set up a raid 0 drive is to use the software that comes with your motherboard. You can also use third party software for this task.
The raid 0 setup will allow you to take backups at any time without the need for any interruption.
Raid 0 is a type of disk array that combines multiple hard disks into one logical unit. It is also known as striping. Raid 0 provides the fastest read and write speeds, but it does not provide any redundancy.
The steps to set up raid 0 HDD are:
1) Create a raid 0 volume with two or more hard drives
2) Format the volume
3) Create a backup plan for the data on the volume
+ 0
It is possible that the monitor is not receiving the video signal from the computer. To fix this, you will need to plug in a different monitor and restart your computer. If the monitor still does not work, it might be time to replace it.
If you are using a laptop, try plugging in an external monitor and see if it works. If it does not work, there might be an issue with your laptop’s graphics card or motherboard.
Eventually, restart your computer in safe mode. If the problem still persists while in safemode, this means that this could be a hardware issue.
+ 0
I am still waiting for your reply. Do let me know if you face any problems while providing the scan logs.
+ 0
Thanks for your reply. Could you please share our tool’s scan logs with us? so that we can check and fix it. Here’s a guide on how to share scan logs with us: https://www.adwareremovaltool.org/check-art-scan-logs/
+ 0
Yes, it will work with all the realtek cards. Here’s their LAN Driver: Download Link
The Realtek LAN onboard card provides a 10/100Mbps speed as well as data transfer rates of up to 1Gbps via its RJ-45 connector when it’s running at full capacity. It also features a maximum data transfer rate of 2Gbps when it’s running at half capacity.
Right now, I am on Acer’s Veriton E430 specification page, but they haven’t provided such details. I got this detail from another website. According to this website, your E430 Motherboard can support speeds of up to 1000 Mbit/s over a local network or on the Internet.
If you would like to know your network speed in Windows 10 then check the “link speed details” on the network page. Here’s a step-by-step guide on how to check your network card speed.
+ 0
This means that you’re getting a “System Disabled” error instead of prompting the BIOS password.
Frankly speaking, if you have forgotten the BIOS password then you’ll have to clear the BIOS battery to make it RESET. Check out this video tutorial to do so: https://youtu.be/C9zrcx0PDhg
+ 0
If the full feature driver doesn’t work then try to install its basic driver as well: Download QHMPL WiFi basic driver.
+ 0
You may use the following driver: Download Driver. It will work on QHMPL1218UL wifi dongle as well.
Alternatively, we’ll help you provide the requested driver. However, if you provide the hardware ID of your WiFi adapter then it would be more helpful to search for its driver in our database. Here’s how you can check the hardware ID of any computer device. https://www.freeprintersupport.com/find-printers-hardware-id/
+ 0
