Disclosure: We are not providing any kind of paid support. Beware of scammers. This page may contain affiliate links read disclaimer

Fix: Operation failed with error 0x0000011B (Windows cannot connect to the printer)

I’ve seen the error message “Windows cannot connect to the printer” with the error code 0x0000011b. It happens most often when a command is sent to a printer that is shared on a network.

If you are also getting the same message, then I will try to help you fix this issue. Let’s find out how to solve this problem.

The error message looks like this

operation failed with error 0x0000011B

What Causes the Error: Windows cannot connect to the printer. “Operation failed with error 0x0000011B.”

The error 0x0000011B is usually seen in networks running at homes or small offices. Since this error is experienced on a computer that is trying to connect with a printer over a network, you can immediately assume that the cause of this error is spread across two computers. The first computer is the client computer where you want to access this printer, and the second is the host computer where the printer is installed.

On the client computer, this error is usually caused by some Windows updates. Recently, it has been observed that some Windows updates, which are supposed to patch printer vulnerabilities, are making it difficult to connect with network printers. On the host computer, this error can be caused by some registry values and a print spooler problem.




Most probably it is caused by the recent Windows 10 update of CVE-2021-1678 Mitigation to fix network printer security issue.

How to Fix : Windows cannot connect to the printer – Operation failed with error 0x0000011B

Before going to the registry hack to fix this issue, it is better to apply some basic fixes.

1) Update Windows

While a Windows Update may have been the initial source of the problem, it may likely be fixed by installing the latest update. Windows Updates are known to introduce strange flaws and incompatibilities, but luckily, hotfixes are released quickly by Microsoft.

Typically, the 0x0000011B issue may be resolved by simply installing the most recent Windows update by going to the update settings. Or check how to install Windows updates manually.

2) Uninstall faulty updates

Updates installed on Windows 10 (and Windows 11) can be removed. This allows you to undo any faulty updates and restore normal operation to your machine.

Searching the Start Menu for “Uninstall Updates” will bring up the option to uninstall updates in Windows 11. You can also refer: how to uninstall windows updates.

3) Restart the print spooler

All print jobs on a computer are handled by a service called the print spooler, which is often the source of printer-related issues. The 0x0000011B issue is often resolved by restarting the print spooler service.

To do so search for services and open the services in Windows. Now search for the print spooler in the services list. Right click on it click restart.

restart print spooler to fix unable to connect printer issue.

4) Fix 0x0000011B error manually by Registry modification

Finally, if none of the above work, or if you don’t want to roll back the updates and newer updates aren’t available, Then you can manually fix this error by doing some registry entry modifications in the Windows registry. My suggestion is to please take a registry backup before proceeding further or create a restore point.

You need to follow some steps both at the client computer (where you want to access the printer) and the host computer (where the printer is installed). Follow the steps given below in the correct order to resolve this problem.

Before applying the solution you must check for the error. Follow the steps given below:

  1. Open the Network page and double click on the printer link to connect with the printer.
    printer
  2. In case you see the error message show below, then follow the steps given in the following sections to solve this error.
    connect

1) Steps for the Host Computer

All these steps need to be performed in the computer where the printer is installed.

  1. Type ‘registry’ in the taskbar search box and click on ‘Registry Editor’ in the search results.
    editor
  2. In the Registry Editor window, navigate to ‘Computer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print’, then right click in the blank space and choose ‘DWORD (32-bit) Value’ option under the ‘New’ sub-menu.
    print
  3. Rename the DWORD value to ‘RpcAuthnLevelPrivacyEnabled’ and press the ‘Enter’ key to confirm.
    DWORD
  4. Right click the newly created DWORD value and choose ‘Modify’ from the options.
    value
  5. In the Edit window, make sure the Value data is set to ‘0’ and click on the ‘OK’ button. Finally, close the Registry Editor.
    ok
  6. Type ‘services’ in the taskbar search box and click on ‘Services’ in the search results.
    windows
  7. In the list of Services, find and right click ‘Print Spooler’ service and choose ‘Restart’ from the menu.
    spooler
  8. Wait for the Print Spooler service to restart. Finally, close the Services window.
    print

Now, after restarting this computer move to the next steps given below.

2) Steps for the Client Computer

These steps are to be applied on the computer where you want to connect with the printer and are experiencing the ‘Windows cannot connect to the printer. Error 0x0000011B’ problem:

  1. Type ‘control’ in the taskbar search box and select ‘Control Panel’ from the search results.
    panel
  2. In Control Panel window, click on the ‘Programs and Features’ option.
    features
  3. In Programs and Features page, click on the ‘View installed updates’ link.
    updates
  4. In the list of installed Windows Updates, choose the Windows update which was recently installed and click on the ‘Uninstall’ button.
    update
  5. Click on the ‘Yes’ button to allow the uninstallation of the chosen update.
    allow
  6. Wait for the Windows Update to uninstall.
    update
  7. Click on the ‘Restart Now’ button to apply the changes.
    now
  8. After the computer restarts successfully, go to the Network page and double click on the printer link to connect with the printer.
    printer
  9. Wait for the printer installation to complete on the computer.
    install
  10. Now, you can see the print queue window.
    queue

That’s it, you have fixed the “Windows cannot connect to the printer. Error: Operation failed with error 0x0000011B in network”.

68 thoughts on “Fix: Operation failed with error 0x0000011B (Windows cannot connect to the printer)”

  1. If all else fail, try to turn off the firewall and antivirus. If still doesn’t work, try to access the computer via IP address in the network places. \\CompName use \\192.168.XXX.XXX of the target machine instead and try to connect.

  2. I reinstalled Windows 10 on one of my computers, and I have been working on this problem for days (along with “unknown devices” in Device Manager) but now it is fixed. I did not have to uninstall Windows updates on client computer. Thank you so much.

  3. I’m running an office with six different computers with Win 7 and Win 10 on them.
    After purchasing a new printer for one of the Win 10 boxes, it refused to be shared across the network.
    Your registry edit worked perfectly.
    Thanks!!

    1. You’re welcome!! Glad to know that it worked for you. Thanks for sharing your experience.

  4. Md Ariful islam

    I’m follow this way but my host pc printer can’t connect to client pc

    1. Techexpert

      – Make sure you are on the same network.
      – Make sure the share-settings are properly set up. Allow all permissions on the share-settings page.
      – Make sure the password should be off.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top