It supposed to have a problem with feeding cards. Mech Error – means Mechanical error. The solution of Lamin Mech Error is to clean the cards (See the below screenshot) or roller manually.
How to remove a stuck card:
- Open the printer cover and remove the ribbon.
- Pull the jammed card very carefully and remove card jam. Please do it nicely, because it may harm your printer components if you do not do it smoothly.
- Replace the ribbon, and then you may close the cover.
Please check the roller cleaning process on page number: 28 and cards removing process in the Evolis Securion user manual.
Figure1:
![](https://www.techsupportall.com/wp-content/uploads/anspress-uploads/2e6be7748050384a1dbed6aaf3457e23f81bbeda_1.png)